About this 3D model

My english is good but not super, so bare with me! Some time ago i was approached by a woman who organizes dildo party's (like Tupperware party's) and gives dildo workshops, mostly for bachelor party's for woman She ask me if i would be interested in making a mold of a dildo? Honestly a little bitt out off my comfort zone. But after some thought i decided to do it. Good learning experience for making a mold. And what better dildo to use than the Bishop V1 https://cults3d.com/en/naughties/fun-dildo I did some research on the internet for making a 3d printed mold. Thirst thing i noticed most of the molds i have seen use nuts and bolts to hold the mold together. I find this such a hassle that decided to use clips. BUT i did use some M3 bolts to center the model. Summary: Print one side of the model like it is in the file. And print the other side of the mold in mirror I printed the mold in PLA, this is for the minimum warping. Ensure that surface of the mold's are flat and smooth. I cut of the heads of 9 M3x16 bolts to use for the centering of the model. And used glue on one side of the mold to hold the bolts in place. Extra: If you download this model you also get the original stl file of the Bishop V1