About this 3D model

This is simply a derivative to be used by laser cutters that require DXF format files. I converted this using the latest version of Inkscape (0.48.4). Also had to move a few of the dots around and converts all the fonts to paths. Cutting took about 40 minutes through 4mm MDF. Update1: *catan03-1.dxf* __do not use this without cutting an extra wheat tile__ Now has more coloured paths. Also I removed the dice value from the desert as it won't have one in the game. *warning, this has the wrong number of tiles so you'll need an extra wheat tile from http://www.thingiverse.com/thing:127087* Purple - Boats, possible raster engraving Green - Text, possible raster engraving Black - Outlines, engrave cut Blue - Circle cuts Red - Tile cuts Update2: *catan04-1.dxf* - removed due to issues Update3: *catan4-2.dxf* & *tree04-2-tested.dxf* Fixed a few problems that were showing up in the lasercut software but don't have the materials to do a test cut of the full set of tiles. I've also created a new tested single tree tile as I believe this is the tile causing most of the problems so feel free to try this single tile out and see if it works.