About this 3D model

One of the easiest DIY Arduinos in the world! Fabricated at Fablab77 in Moscow. Compatible with original Arduino Duemilanove. Needs Sparkfun FTDI Basic or FTDI Cable for programming. Features full SMD components for better soldering expirience. Current version - 1.1. :UPD: Source files are designed in Eagle 6.4. ::UPD:: Partlist: 1x ATMega328 PDIP 1x LM1117-5.0 1x PDIP28 Socket 1x Breakaway SIP Connector 1x 5.0mm SMD Power Jack. 1x 6mm OMRON Button 2x SMD1206 LED (any color) 2x SMD1206 0.1uF Capacitor 1x SMD1206 10KOhm resistor 2x SMD1206 100Ohm resistor 3x SMD1206 0Ohm resitor (solder jumper) 1x 6pin SMD 0.1 pitch connector 2x SMD1206 22pF SMD Capacitor 1x 16Mhz HC49 Crystal :::UPD::: I reccomend to buy Sparkfun Arduino ready version of ATMega328 so you do not need to flash bootloader by your own.