About this 3D model

I tried to print the "z endstop adjuster.stl" however it always came out horribly. Attributing this to the fact that it's tiny with 2 M3 holes and nut traps I instead made my own with an integrated flag. This removes an M3 bolt & nut and takes only a little longer to print. ###Parts Required * 1 off 3D printed "Cantilever Z Flag.stl" * 3 off M3x20mm bolts * 3 off M3 nut * 2 off 5mm M3 standoffs * ~70mm of black electrical insulation tape