About this 3D model

***UPDATE: I have removed the non working Stl's and will soon be uploading a new revision after I do a few test prints. I have uploaded new photos of the revision this one according to the Ramps1.4 models should work out. I will be printing a section of the case to see if the ramps actually fits. The poly fuses can be bent foreword to clear the case. I will add a cutout for the reset button as well or make a small printable button for it.*** ***I have opened the Tinkercad URL to the public*** https://tinkercad.com/things/hKcDOhFprKg-rampscase-14-revised I was looking for a Ramps 1.4 case and came across this one, I liked the style of it. But since he had only made it for a CNC machine, I revamped it. Added a mount for a 40mm fan, through holes for cables "layout may change" bigger vents on the front panel, access area for hotend/heatedbed/fan blocks and an access area up top to tighten and loosen the block screws. I also re aligned the case rails so no more dremel is needed to get the back plate to fit correctly. I have not printed this Item yet, as my printer is currently being upgraded and is out of commission please print at your own risk. Feedback welcome. UPDATE: 6/3/2013 *Split up parts into individual .Stl files. **Revised the back panel, so it will now print flat. ***Added a Main.stl with breakaway supports for the long bridges (for those printers like mine that have issues with long bridges), supports are .5mm thick and should easily break out with a little force. ***Fixed and re aligned rails for the front panel, (missed that they were off) now there should be no need for a dremel at all.