About this 3D model

Based on the trinity extruder, but rotated 90 so the phidgets stepper does not foul on the X ends Phidgets 5.18:1 geared stepper x 1 M4 x 50 caphead bolt x 2 M4 washers x 4 M4 nuts x 2 M3 x 8 caphead bolt x 4 C510 (1/4 x 1/2 x .035) springs x 2 from century springs or similar 8mm trinity labs hob x 1 M3 nut x 1 M3 x 25 caphead bolt x 1 608 bearing x 1 8mm x 20mm shaft (or M8 x 20 grub screw, or M8 x 20 threaded rod)