About this 3D model

Intro ----- The goal of this project was to create a small, modular, printable quadcopter body. I aimed to keep this as simple as possible. The quadcopter is made up of a core, and 4 arms. All arms are identical. ___ Parts List ------------ - Turnigy 2900KV Brushless Outrunner OR Turnigy Park480 Brushless Outrunner 1320kv - Turnigy Plush 6A ESCs or HobbyKing 6A ESC 0.5A UBEC - 5030 Props - 5030R Props - 1000mAh 2S NanoTech LiPo (or similar) - KK2 Flight Controller - 8 x 12mm or 15mm M3 Bolts - 4 x 40mm M3 Bolts - 10 x M3 Nuts Read assembly instructions for more details. ___ Change List ----- v2: Spacing change, removal of extra weight. Landing strut available if you don't want to use M3 screws v1: Initial release