About this 3D model

Fan shroud for the Rostock Max by SeeMeCNC. This is still a bit of a work in progress as it requires a little final sanding to provide clearance for the U-joints, however, clearancing them in the model would increase an already heavy overhang. This SHOULD work with the new nozzle designs with little (or no) modifications. UPDATE: This has been redesigned. It looks like it now clearances the u-joints without modification (if it makes contact it should be JUST barely). It has also been slightly shortened to allow easier assembly with the longer hotend bolts. Finally, the angle of the fan has been rotated to a 45*, which should help with airflow (less bend) and makes for an easier print (fewer overhangs). CAD file is the old design, I'm tweaking some things still for a 40mm setup and need to redo the CAD file for the new design. Will upload those when complete. UPDATE: Experimenting with this fan setup is causing too much back pressure still with my current fans. Check my other "Things" for additional designs that are more successful on the SeeMeCNC Rostock.