About this 3D model

Balancing for radio controlled aircraft Here is a support to print 2 times, and to assemble with an aluminum tube of 7.5mm. I used a length of 1 meter cut into 7 pieces. The pivot consists of 2 pieces to be clipped, the rest of the parts fit and slide on the aluminum tubes. Layer thickness 0.3 Hull thickness 1 Fill rate 30 Temperature of 220C ° printing Media Type all over Balancing for radio controlled aircraft Here is a support to print 2 times, and to assemble with a 7.5mm aluminum tube. I used a length of 1 meter cut into 7 pieces. The pivot consists of 2 pieces to clip, the rest of the pieces fit together and slide on the aluminum tubes. Thickness of layer 0.3 Shell thickness 1 Fill rate 20 Print temperature 220C ° Support type everywhere