About this 3D model

You can prototype almost any kind of robotic platform or experimental laboratory equipment with these connectors. Update 9/15 - Plexiglas holder inline, 3 variations, 2.5 mm thickness, used for walls and floors or splash screen in prototype platforms. Update 6/23/14 - Standard servo holders. Mount in-line, single side, dual side, 90 degree. Ideal if you want to use the maker beam as a skeleton. Indents show where to drill holes. Update: 2/23/2014 - Vertical and horizontal limit switch holders for momentary button type normal open type switches. Update 9/22/13 - 28ByJ-48 Small 5V stepper motor mount both front and side - Files named "Small Mount Front,Side,Top,Bottom respectively. Update 7/14/13 - Vertical stepper mounting plate - Example gallery images of axis motion. - Kit Tamiya Ladder, Chain and Sprocket set Item #70142 - 13 tooth gear drive sprocket and idler for Tamiya kit (see above) UPDATE 6/30/13 Thumbwheel parts - Thumb frame - Thumb Pinion gear - Thumb Hold down - Thumb Axle UPDATE 4/13: M6 pan head nut and bolt, stand off. UPDATE 3/13: - Rack for 13 tooth 12 mm pinion gear on a 3.1 Volt Allelectronics Stepper motor. - Added ZIP file of "Final parts.zip" UPDATE 2/13: Added Plexiglass holder Inspired by leitenmu at http://www.thingiverse.com/thing:47087 Added new contours and other parts to the set. ----------------------------------------------- These connectors will allow the fabrication of almost any shape or enclosure, using the 20x20 mm MakerBean type model from dbozec ( http://www.thingiverse.com/thing:27825 ). Especially desinged to facilitate the construction of experimental laboratory equipment and platforms. The connectors are meant to be glue-"welded" to each other with ABS acetone slurry or cyanomethacrylate (crazy glue). With these connectors you can do end-end, corner, rail, groove, flat top or plate, sliding surface, T-pieces end to side and side to side connections, wire guides and mounting or fixation parts. You name it...