About this 3D model

Br. Make your own portable battery with a unique saber laser design for under 20 €! To do this, follow these steps: 1- buy the PB-N37-Gray-FRA battery, an external battery from Aukey of 5000mAh. It is available in black for 14 € on amazon https://www.amazon.fr/dp/B01CI2C2I0/ref=psdc5520534031t2B015XJ6N2Q?th=1 you can also find it in month of 10 in gilded https: // www. Amazon.com/dp/B01B1FZU8E/ref=psdc5520534031t2B015XJ6N2Q?th=1 I do not recommend using another battery because its dimensions may not correspond with that of the saber-shaped shell. However, if you still want to use another model, please check that it is approximately 9.1 x 3 x 3 mm. 2- download and print the 3D model that I propose. You can smooth the surface with sandpaper if 3D printing is not very fine. You can print your object in black or paint it for better rendering. 3- Insert the battery into the printed shell in the direction shown: the USB connectors on the bottom of the shell (on the plug side) so that they can be reached once the plug is closed. 4- screw the cap on the bottom of the lightsaber. You can now use your battery lightsaber. Certainly this one is more bulky than a "classic" battery, but it will make you a Jedi. Do not hesitate to send me your questions and send me the realization of your 3D printing.