About this 3D model

This 20x20mm frame tripod clamp designed for RigidBot. But can be used on any other 20x20mm metal bar. Clamp is used to attach camera equipped with standard 1/4x20 threaded socket. Current design can hold only fairly light camera, like GoPro. Reinforced design will be developed. Has slots for 4 x 6-32 (or M4) nuts Designed for 6x32 bolts, M4 will works as well. To make one: Get from hardware store 4 x 6-32 or M4 nuts and bolts Get 1 x 1/4 x 1/2 hex bolt (Doesn't have to be hex, I used whatever I had laying around) Print 2 attached pieces. Put all together as on attached illustration Provided sample printed with PLA, lh=0.2mm, te=211C, tb=80C Cover printed 100% solid Clamp printed 30% solid Note: Please rotate Cover part to be flat on the XY plane before printing. __Update1__: Added L Extension, which allow horizontal mount of camera when clamp attach to the frame vertically.See RigidBotExtension.stl. Required to get 1/4 bolt and nut to attach extension arm to the clamp