About this 3D model

http://www.aumat.de https://www.youtube.com/watch?v=GKkuCZWepTc&feature=youtu.be In order to minimize vibrations of the print head and to thus improve the print image, a clamping piece is fixed to both the left and the right side of the guiding shafts. The drill holes (8 mm) for the guiding shafts should be polished with an H7 reamer. Required additional equipment: 8 screws with nuts and washers M4x25 8 screws with nuts and washers M3x40 1 drill with a diameter of 3.5 mm to drill 4 holes in both the left and the right aluminium sheet. 1 reamer 8 mm H7 Assembly: See photos