About this 3D model

A Tilt mount for larger board cameras for the front of the FPV250 from Hobbyking / Diatone. Max camera size: 40x40mm It has holes where all my cameras have cables... Needs a small servo for tilt. [Files can now be found here.](https://www.youmagine.com/designs/fpv250-tilt-camera-mount) FPV250 frame can be obtained from here: [ARF, with motors, ESCs, battery](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=52863&aff=1090853) [Bare frame only](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=47075&aff=1090853) Cameras taken into account: [420TVL](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=11977&aff=1090853) 700TVL Sony with OSD control connector (in metal housing) History: ---------- _2014-05-21_ * Made small holes larger, increased clearance for hinge. * Moved servo hole spacer 2 mm away from hinge. _2014-05-22_ * Moved one cable hole to align with my 700TVL camera. * Added alternative mount for possible other platforms (that simply want to hot glue it on) _2014-05-26_ * Added version with hinge moved up to mount camera lower - needed for > 5" props. * Added version with hinge at top of camera - usable for other quads / planes if camera is configured to flip image. _2014-06-15_ * Moved files to [Youmagine](https://www.youmagine.com/designs/fpv250-tilt-camera-mount)