About this 3D model

__Carabiner mount for the Garmin GPS 60 Series bike mount__ * __Designed for the bike mount of the Garmin GPSMap 60 Series.__ __!__ The adapter links directly to the bike mount so _if you don't have the bike mount or a mount with the same system, like the car-mount, you can't use this adapter_. __!__ When I'm riding my bike with my GPS attached I always have the problem that when I make a rest I don't know where to put my GPS, because the bike mount is attached to the GPS. With the bike mount attached, the GPS doesn't fit in the GPS-carry-bag which has an attached carabiner and when I use the other GPS adapter with the carabiner which does link direktly to the GPS I don't know where to put the bike mount, if I don't want to leave it on the bike. So I designed a carabiner mount for the bike mount. * __Easy to use:__ The _'GPS Mount Carabiner Adapter'_ links to the bike mount in the same way it links to the original bike adapter or car adapter. So you can attach it with a click and remove it by pressing the button like you do it with the original mount. * __Practical:__ A carabiner can be attached to the hole on the top-side of the adapter and with the carabiner you can attach the GPS easily to your backpack, belt etc. without removing the bike-mount-adapter. * __Cheap:__ You need about 20ct worth of plastic to print it. * __Printable without support:__ If oriented with the carabiner-hole downside to the print bed you can print it without support. The only print-critical part is the hole for the carabiner. * __Special:__ This adapter works only together with the bike or car mount from Garmin as seen in the pictures. Hope you enjoy it! Have fun! Chris _Credits:_ The design was developed in _FreeCAD_. http://www.freecadweb.org Thank you for making such a powerful software available to the public!