About this 3D model

Custom grip for the Steyr EVO10E/EVO10E SX based on the Morini 162M grip. Customizable with removable side panels for aesthetic coloring or a place to put custom designs. Comes with adjustable thumbrest and beaver tail. The parts are ISSF 2026 compliant. Grip is also compatible with other Steyr air pistols. Some older pistols like the LP1, LP2, LP10 require the use of an M5 screw instead of an M4, for these you will need to enlarge the screw entry hole at the bottom slightly. You will need the following to use the grip: 2 M3 inserts , 2 short M3 screws for the battery plate chamber 2 M3 inserts , 2 short M3 screws for the top side panel 2 M3 inserts , 2 short M3 screws for the palmshelf side panel 1 M4 6mm bolt and nut for the thumbrest 1 M4 30mm bolt and nut for the dove tail 2 M4 T-nuts and 2 20mm M4 screws for the palm shelf 1 M4/M5 30-50mm boltand washer for the grip screw High rake spacer - for highly angled grip (reduces need to use under screws), may need a longer grip screw Straight spacer - for standard grip styles WARNING: mind the power cable that it doesn't get under the spacer