About this 3D model

Introducing a new lineup of battery trays and custom TrailVault watertight receiver cases designed specifically for the RedCat Vertex-6 and Yikong YK4061 Rockslide. This product range lets you customize your rig and eliminate the small, restrictive stock receiver box. Our redesigned battery trays improve fit and usability with real-world trail upgrades. Integrated water drainage channels and drain holes reduce water build-up, while built-in sizing walls keep different battery sizes secure. Extra clearance around the motor and slipper clutch bolts prevents interference, and added tray height keeps the battery strap and velcro safely away from the slipper clutch bolts. Solutions (Combos): A - Mini Tray - Ideal if you are running a smaller battery and want to remove the stock battery tray. B - Full Tray - Designed for running larger batteries in your Vertex-6. C - Mini Tray and Medium Trail Vault - Replace the stock tray, run smaller batteries, and gain extra protected space for your receiver. D - Full Tray and Medium Trail Vault - Run full-size batteries while adding additional room and protection for your receiver. E - Mini-Vault - A compact option that pairs a slightly smaller battery tray with a Small TrailVault, all without taking up extra space. F - Solo Medium TrailVault - Perfect if you want to keep the stock battery tray but need more room or protection for your receiver. Fitment Note: Measurements shown are approximate, add 1mm or 2mm to be safe for tight fits. Watertight: The TrailVault receiver case was tested with two servo wires installed and submerged in 4 inches of water for 5 minutes. No water entered the case during testing. Results may vary. Additional wires increase the chance of water intrusion during submersion. Watertight performance is not guaranteed. What’s Required: Sealing Foam - Required for TrailVault assembly - https://amzn.to/4jbSOxS TrailVault Hardware - 4 or 6 × M3 x 12 mm screws and 4 or 6 × M3 hex nuts Medium TrailVault Only - 1 × M3 x 16 mm screw Zip Ties - 1 or 2 × 2.5 mm wide zip ties - https://amzn.to/4jIK7vf The above are affiliate links that help us out. Don't have a 3d printer and are still looking to grab any of these items? Checkout my Etsy store - https://sbiprints.etsy.com/