About this 3D model

Automatic scanner for your 3D scans. Print in PLA or PETG, using the printing profile of your choice. Print plate required 180x180, i had printed all with my A1 mini. You will find; Complete project in STEP format Software Electrical schematic STL files. Bill of Material + Amazon links For your scanner, the following additional parts will be required: Bearings 30 × 37 × 4 mm (2×) Bearings 15 × 21 × 4 mm (8×) Bearings 5 × 16 × 4 mm (2×) M4 × 6 threaded inserts (as required) M3 × 6 heat-set inserts (as required) NEMA 17 stepper motors, 39 mm height (2×) GT2 idler and standard pulleys (1×) 5 mm diameter shaft, 78 mm long (1×) 1:40 worm gear, screw and gear sold together (1×) Drone flanges, Ø22 / Ø10 mm (2×) Ø50 rubber bands (2×) GT2 6 mm toothed belt, to be closed/glued (1×) ELECTRONICS Arduino Shield V4 board (kit with Arduino and A4988 drivers — TMC2208 preferred, compatible without software changes) (1×) Optical endstop sensor (2×) 1602 display with I2C interface (1×) KY-040 rotary encoder (1×) Arduino breadboard jumper wires for connecting the display (3×)