About this 3D model

Elegoo Neptune 3 Pro Front Camera Mount This is a custom front-mounted camera holder designed specifically for the Elegoo Neptune 3 Pro. Compatibility note: Designed for Elegoo Neptune 3 Pro. Not tested on Neptune 4 / 4 Pro. Bed adjustment geometry is different. The design consists of two separate printed parts: The mounting block that attaches to the front bed adjustment mechanism The long angled camera arm After printing, these two parts are bonded together using fast glue (cyanoacrylate / super glue). This approach allows for easier printing, better strength, and cleaner results. The mount provides a stable and clear front view of the print bed, making it ideal for timelapse recording, remote monitoring (OctoPrint / Obico), and general print observation. Features Designed specifically for Elegoo Neptune 3 Pro Mounts to the front bed adjustment area Two-piece design (mount + long arm) Parts are joined using fast glue Stable and vibration-resistant Does not interfere with bed movement or nozzle travel Suitable for most small USB webcams Print Settings (Tested) Layer height: 0.2 mm Infill: 15% Supports: Required Material: PLA (PETG recommended for enclosed printers) I printed and tested this mount successfully with the settings above. If you plan to use the printer in an enclosure or warmer environment, PETG or ABS is recommended. Feel free to remix or adapt it for different cameras. If you find it useful, a like or comment is always appreciated. Happy printing! Note: To secure the camera, you can use a printable camera thumb screw. This model works well: https://cults3d.com/en/3d-model/tool/customizable-camera-screw-thumb-screw