About this 3D model

Illuminated base / display for models (or other) Wanting an original base for my Star Destroyer, I designed these modules that can be assembled to form a base either square or rectangular depending on the number of elements you want. This luminous base can be used to present any other model of the science fiction genre ( or other ). The elements are 122mm long. There are 4 models of straight elements to vary the look. They are not very different but it is enough. There is only one model of angle except one that has a housing to insert a push switch which allows to light the base. The right elements receive 3 LEDs of 5mm diameter. The corners receive 1 single. I power 22 LEDs with 2 batteries of 1.5v and without resistance ( without risk in 3v!) . I used white LEDs. For the covering of the base it will be your choice, plastic sheet semi opaque and lit from the inside, mirror like me or other...... Glue the elements together with the 2 component epoxy glue. Print in PLA , 0.2 , 15% filling , 3 perimeters. Battery holder: https://www.amazon.fr/gp/product/B016KCSZGM/ref=ppxyodtbasintitleo02_s00?ie=UTF8&psc=1 Push button switch: https://www.amazon.fr/gp/product/B083K24XF6/ref=ppxyodtbasintitleo07_s00?ie=UTF8&psc=1