About this 3D model

This is a model of the Turboprop Engine for Business Aircraft, etc. Engine of this class has many features other than the large size jet (fan) engine. - Smaller size - Higher RPM - Lighter weight These features make the complex air flow and unique configuration. There are two types of this class engine; - Direct drive This type model was uploaded to the following URL. https://cults3d.com/en/3d-model/tool/turboprop-engine-for-business-aircraft-cutaway - Free turbine This cutaway model is the free turbine type. Features of this model has 2 major assemblies ①. Free Turbine Assy (Forward of Engine) (1) Power Turbine Rotor (2) Dual Planetary Reduction Gearing (3) Exhaust Ducts ②. Gas Generator Assy (Backward of Engine) (1) Circumferential Type Air Intake (2) Combination Type Compressor (Axial + Centrifugal) Note: Stators of Axial Compressor are intentionally omitted to avoid rubbing during rotation. (3) Reverse Flow Combustion Chamber (4) Axial stage Turbine (5) Accessory Gear Box (including Oil Tank) Assembly Manual (PDF format, total 19 pages) The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)". Download files includes; -files: STL Files (60 items) STL file name: "ws" of last 2 digits means "With Support" which special designed. -images: Parts Breakdown for assembly Aid, Subassembly Photos -PDF (Zip) File: Assembly Manual Purchase Parts Information; (No Metal Ball Bearing is used) -Aluminum Tubes See Parts List -Screws Micro screws M1.4x3.5L - Appox. 50 ea - Direct screw-in to 1 mm dia hole (No nut) Screws M2 x ** - See Parts List Total Net Print Time: Approx. 50HR - (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. This is the most challengeable item in the creations which I made before. I do hope your success!! [Update] - 2018.3.14 Photo of typical special support is added. [Update] - 2018.7.12 Revised Description only. [Update] - 2018.7.19 Modified Comp-Rotor901ws.stl is introduced. [Update] - 2018.7.20 Modified Comp-Rotor901ws.stl was changed to Comp-Rotor801ws.stl and 3-piece type [Update] - 2021.4.12 Improved files and related figure uploaded Comp-Rotor-1st-01ws.stl → Comp-Rotor-1st-101ws.stl Comp-Rotor801ws.stl → Comp-Rotor801aws.stl [Update] - 2021.4.14 Improved file Comp-Rotor-1st-101ws.stl - Re-changed [Updated] - 2022.2.24 "Note" added in ②(2) [Update] - 2022.6.20 "Assembly-Manual-R01" reflected above Mod-Parts is uploaded