About this 3D model

Model of a Rotterdam single-articulated Dûwag tram in scale H0 (1:87). A traction unit, e.g. from Halling - with 9 mm wheel diameter - and a pantograph, must be added, but a dummy wheel system is included in the files: Wheelholderfront.stl Wheelholderback.stl Due to correct scale in width, the model is made without bogies. Therefore, the model is best suited to the radius of tracks of at least Piko R2 - r = 422 mm. If a smaller radius is desired, the file below can be used to connect the sections: Connectorfromfrontorbacktomiddlehouselong_x2.stl If the model is to be equipped with 3rd party bogies, the width of the parts must be expanded in the slicer before printing. The model is assembled in the middle with the included connectors to front / back body and locked with the locking plate. Use the file to connect the sections: Connectorfromfrontorbacktomiddlehousex2.stl Use 3 mm bolts and nuts for assembly. See example in video: https://youtu.be/ORYcIDuSwKU