About this 3D model

Adapter for ASI cameras on Meade or Celestron F6.3 focal reducers Screw adapter for Meade or Celestron f6.3 focal reducers. The fixing of the camera is done with the adapter to the flow of 31.75 provided with the camera and the tightening of this one by 2 M3 screws (prefer plastic screws) it will be appropriate to pass a tap M3 to make nice threads. These two gearboxes having different backfocus (105mm for Celestron and 86mm for Meade), this adapter is available in 4 versions :1> rdf Celestron + Asi Bf 12.5mm 2> rdf Celestron + Asi Bf 17.5 mm 3> rdf Meade + Asi Bf 12.5mm 4> rdf Meade + Asi Bf 17.5 mm If you are using Simplify3D , use variable profiles to print the thread area in 0.1mm and the rest in thicker layers to save time , otherwise leave everything with the same layer height. Printed in 0.1 + 0.2 , 40mm/s , 15% fill , PLA Amazon Basic at 205°. google translation ( sorry ;) ) Adapter for ASI cameras on F6.3 Meade or Celestron focal reducers Adapter screwing on f6.3 focal reducers from Meade or Celestron. The fixing of the camera in fact with the adapter to the 31.75 slide supplied with the camera and the tightening of this by 2 M3 screws (prefer plastic screws) it will be necessary to pass an M3 tap to make beautiful threads. These two reducers with different backfocus (105mm for Celestron and 86mm for Meade), this adapter this decline in 4 versions: 1> rdf Celestron + Asi Bf 12.5mm 2> rdf Celestron + Asi Bf 17.5 mm 3> rdf Meade + Asi Bf 12.5mm 4> rdf Meade + Asi Bf 17.5 mm If you are using Simplify3D, use variable profiles to print the area of the thread in 0.1mm and the rest in thicker layers to save time, otherwise leave everything with the same layer height. Printed in 0.1 + 0.2, 40mm / s, filling 15%, Amazon Basic PLA at 205 °.