About this 3D model

This is a model for a full size table that i had designed to be made in bamboo. Instructions : print all the parts at 0.25 mm layer height using a .4 or less nozzle. The parts are interconnected using a m3 threaded rod and nuts. The battery holder is mounted in the center. Print 6 sets of the leg set and 2 sets of the cross brace set. For anybody interested in making it i would be making a detailed assembly diagram. The motors are optional. The model can be moved manually also if needed. I used 1:100 ratio 6v geared dc motors. Also a lot of plastic lubricant is needed and it tends to jam up the legs are joint together using m3 x 12 mm hex nut and bolt.