About this 3D model

When I worked for Make Labs, I created this fun 3D print that takes a GoPro Camera and allows you to fire it out of a conventional spudgun. Retractable Spring loaded fins ensures a smooth and stable flight, while the Spring Cushioned Nose Cone helps making the whole trip survivable for the GoPro.Instructions to Assemble your own can be found on the Make Website at: http://makezine.com/projects/make-39/cannon-cam/ Instructions: - Print the nose cone impact head, fins, slip rings, and window frame (get files here) at 80 percent solid infill. Print the remaining parts with 30 percent infill. - Make sure all the major body modules printed correctly, then use three 8.75" lengths of 6-32 thread rods to hold things together temporarily. - Once you have lined everything up and made sure all the modules sit flat against one another, mark the parts with a black Sharpie to ensure the Cannon Cam is always assembled the same way. - TIP: If your printer doesn't print evenly, line up the pieces so they lean the same way, to keep the modules from binding up.