About this 3D model

Hi there! I’m sincerely hoping you will enjoy this 3D printed Jeep with tank tracks controlled by android phone! The construction is very simple, in one day you can fully print & build it!To Control it you have to download in the Play Store the "Bluetooth RC Controller" app.Found stuff you will need to make it below Enjoy this project ! Cheers You will need few electronics things to make it: • 2 small Gearing Motor • 1 Battery LIPO 2S • 1 Arduino UNO • 1 Motor Shield • 1 Bleutooth Receiver • 4 LEDS & resistors for head light! • M3x30-35mm screw to fix the front wheel I printed tank tracks in NinjaFlex, but you could print in in an other flexible filament ! I give you links to stuff I have use to build mine! It’s up to you to use different but equivalent stuff. Motor : http://www.robotshop.com/ca/fr/moteur-engrenages-pololu-50-a-1-micro-hp.html (50 :1 Reduction work well, you can also try with 30 :1 ) Motor shield: http://www.robotshop.com/eu/fr/blindage-controleur-moteur-arduino-v3.html Shield Bluetooth: http://www.robotshop.com/eu/fr/blindage-bluetooth-arduino-maitre-esclave.html Battery: http://www.a2pro-online.com/black-lithium-2200mah-35c-2s-119-grs.html