About this 3D model

There are two mine field options in Bolt Action- These STLs reflect that; one titled AP minefield (anti-personnel) has smaller mines visible on the service; the one titled AT minefield for Anti-tank has larger ones. Please look at the photos; the AT one is in the centre of the photos. You may prefer one over the others. The signs will fit both mine fields; you have the choice of the generic skull and bones, the German “minen!”; and the English “halt!” Please print the fields themselves at 0.3mm layers but the signs at a finer setting; I used 0.1mm layers. To finish I used a rattle can primer, then painted the exposed mines with an olive green, inked them and drybrushed. I then used PVA tinted with brown craft paint and sprinkled cat litter and flock onto them. Once dry I used a small brush to clear the flock away from the mine heads and then spray varnished. Don’t glue the signs in; they friction fit easily and can be switched out and removed for flat storage of the fields. • Please note the pre-supported files for resin printing may not be ideal for your printer, resin, or settings. They are provided as a courtesy only, and while they worked well for me, your results may vary. • Always clean support material away carefully and test fit before gluing. If you have any questions, concerns or difficulties, please contact me at deweycatproductions@gmail.com