About this 3D model

Printed parts used in a ski pulk. All parts were printed in polycarbonate, nylon, or PET. This design uses a Paris Expedition Sled, 65" epoxy poles from Tap Plastics, a 6mm rope, an Osprey Hip Belt, and 1inch x 1mm webbing. I've been using various versions of this pulk for a few years and make a few changes each winter. Then fins and brake are only needed for steep slopes and traverses. They're 3mm thick and designed to be printed with a 1.2mm nozzle, 1.5mm extrusion width, in vase mode.