About this 3D model

The French interwar military development was a mixed bag; some good ideas with poor execution, and some questionable ideas carried too far. Although the events of 1940 didn’t pan out for most of these investments, they did make substantial strides taken in mechanization. One such advance was the Renault UE Chenillette armoured carrier. These were produced in the thousands, and were intended to act as a protected supply carrier. The design was exported to other nations, as well as manufactured under license in Romania, who produced them locally as the Malaxa carrier. The early war saw the Wehrmacht secure a series of lightening fast victories, and the fall of France in 1940 left some 3,000 of Renault UE carriers in German hands. Most continued to be used as utility tractors, towing light guns, but others were adapted for more martial roles. Some were even mounted with light ATGs or machine guns, but one of the more effective efforts was as a mobile multi-launcher, the Wurfrahmen auf Infanterie-Schlepper UE(f). These carriers mounted four 28/32 cm rockets either on a rack behind the driver or off the sides of the hull. In the design, I have both the multi-launcher version as well the normal “utility” version, with a tarp over the rear cargo box. This would be as appropriate tow for most European Axis players, as well as the original owners, the French. The .stl pack is available for both resin and FDM printing. The FDM file required losing some detail in the interest of robustness, but resin printing will yield a superior result. This is a small model (the actual UE carrier was less than 3 metres long, the printed model in 1/56th is just over 50mm).