About this 3D model

This storage tub is designed to utilise the compartment that the Mavic 2 Battery would normally occupy. When travelling with the Mavic 2 drone I like to keep the Battery in a separate place, so this 3D Printed Storage Box uses the battery area as storage space for; SD Cards, Cables, Feet Extenders and anything else that can fit into the surprisingly spacious compartment. Compatibility This has been tested in the Mavic 2 Pro but it should work OK in the other Mavic 2 models. * Mavic 2 Pro * Mavic 2 Zoom * Mavic 2 Enterprise Features Snap-fit lid with lip for easy open Latch clicks tub into place Fits when the Mavic 2 arms and props are folded If anyone finds any problems (dimensionally or otherwise) post them up so I can get the fix model. Instructions All parts should orientate correctly on slicer plate After printing, check latch operates correctly before using it in the drone Credits * For the gallery image renders, this model was used: DJI Mavic 2 Pro (https://skfb.ly/6R8AK) by MattMaksymowicz is licensed under [Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/). Experimental Design Disclaimer This model has been designed for a specific use case, it has not yet undergone extensive testing so use it at your own risk. Constructive feedback is appreciated.