About this 3D model

Polymaker's Animatronic Eye Mechanism. Designed for desktop extrusion based 3D printers. List of Non Printed Parts:2 x Servo (Futaba S3003)1 x Transmitter 2.4 GHz1 x Remote Control 2.4 GHz1 x 5v DC Battery6 x M2 Nut12 x M3 Nut6 x M4 Nut10 x M2x10mm4 x M3x10mm4 x M3x12mm4 x M3x30mm1 x M4x25mm1 x M4x45mm2 x 13mmx4mm (Internal Ø 4mm) Bearing Quantity:1 x Board.STL (35% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)1 x Pivot X.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)1 x Pivot Y.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)1 x Servo Arm Extension X.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)1 x Servo Arm Extension Y.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)2 x Ball 11.9.STL (20% Infill, 0.1mm Resolution, 2 Shells, PolyMax)2 x Socket.STL (20% Infill, 0.1mm Resolution, 1 Shell, PolyMax)6 x Coupling.STL (0% Infill, 0.2mm Resolution, 2 Shells, PolyFlex)2 x Eyeball.STL (15% Infill, 0.1mm Resolution, 2 Shells, PolyMax, PolyPlus)6 x Pin.STL (100% Infill, 0.1mm Resolution, 2 Shells, PolyMax)4 x Conrod X.STL (50% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)2 x Conrod XY.STL (50% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)2 x Conrod Y.STL (50% Infill, 0.2mm Resolution, 2 Shells, PolyPlus)4 x Leg.STL (25% Infill, 0.2mm Resolution, 2 Shells, PolyMax) Printer Settings Printer Brand: MakerBotPrinter: MakerBot Replicator 2Rafts: NoSupports: NoResolution: 0.1mm - 0.2mm Part DependingInfill: 0% - 100% Part Depending Notes: Will print on any single extrusion FDM/FFF printer with a minimum bed size of 154mm x 125mm x 21mm Videos: Demo: https://www.youtube.com/watch?v=TNx-_I5kFTw Tutorial: https://www.youtube.com/watch?v=Y0upri54Jhs Assembly: https://www.youtube.com/watch?v=1pl6htepvRo