About this 3D model

When we evaluating the progression in armour development in WW2, we tend to think of the early war tanks as the small light AFVs - the Pz 1, the R-35, the Mark VI light tank – and only late in the war did behemoths take the field; such as the King Tiger and the IS-2.Neglected is the first true mammoth AFV of the war, the French Char 2C. The proportions of this AFV are staggering – measuring over 10 meters in length, over 4 meters in height, weighing in at 69 tons, it had a crew of 12. Although designed to be employed in the Great War, it remained in service and only the rapid German advance in 1940 prevented it from engaging in combat; instead, they were abandoned en route to the front and were disabled by their crews.In Bolt Action, the Char 2C packs quite a punch; a 9+ armour tank (upgrade to the command version gets you to 10+!) with a light howitzer in the main turret, a rear turret mounted MMG and three hull mounted MMGs; in a game of Bolt Action you can potentially fire onto fire different targets in a single turn. It is “slow” but serves as almost a tracked fortress. This .stl is suitable for both resin and FDM printing. It is a large model, measuring 185 mm long. It has a total of 12 parts in the FDM file. The resin files include the basic file and hollowed and pre-supported filesThe Rear Drive Sprocket have one beveled edge; the non-beveled edge abuts the track; the recesses for these on the rear lower hull will be self evident. This model will be large on your build plate; the tracks are 185mm in length. Print with supports. To get the detail in the .stl, please print within a .1 to .14mm layer range; going any coarser will erode some of the detail. As with any 3D print, please take care removing the support material and always test fit before gluing.