About this 3D model

Support If you would like to support future free releases, please feel free to leave a tip (especially if you sell prints of my designs). I really want to keep on giving these things away for free. Making use of the affiliate links that I provide to purchase parts is also a way of supporting me that doesn't cost you anything. I don't recommend anything that I haven't personally used. Failing all of that, I heartily appreciate a credit or link back to my facebook page when you post your prints on social media. Introduction This is an accurately scaled 1:10 MB jeep which makes use of affordable drivetrain parts off of a 1:18 scale Kulak crawler. The tyres are quite obviously not to scale. I think these would be perfect, but they are too pricey for me. Video Full instructions on my Instructable Updates These are a list of updates as they happen, so that you know if there are improvements/fixes since you last downloaded. 2017/01/25 Added hitch mounting holes to rear bumper Increased wheel hex hole to 12.4mm for easier fitment Uploaded corrected frame rails Added servo bracket/shock mount Added holes to front fenders for shock mount 2017/01/27 Added headlights 2017/01/30 Tightened tolerances on leaf shackle_a and shackle_b to reduce side-to-side movement Added seats (and updated "front_floor_and_tub" with matching mounting holes) Roadmap I am marking this project as "in progress" since there are still a number of improvements/fixes that I would like to make, I will list them here and tick them off in the update list as they are done. If you wanted to be kept abreast of developments, follow Ossum on facebook Add a hinge for the hood Add shock supports (design is complete, just need to be tested) Add steering wheel