About this 3D model

HueForge version of the famous Raising the Flag on Iwo Jima photo. This is part of my HueForge collection using polymaker filaments. Although it was designed with polymaker filaments, others can also be used. Print Settings Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 0.3 PLA PolyTerra Cotton White Transmission Distance: 2.5 Swap Instructions: Start with Charcoal Black At layer #10 (0.88mm) swap to Fossil Grey At layer #13 (1.12mm) swap to Cotton White for the rest. The following filaments were used in the pictures above: polymaker PolyTerra Charcoal PLA polymaker PolyTerra Fossil Grey PLA polymaker PolyTerra Cotton PLA