About this 3D model

### Easy, printed in place, flat surface with only 3 colors. With this file, you can check the transparency of your colors. Please compare them with the image above to check the results! Recommended Colors: -Black -White -Color but you can check with any color you want! This model is printed facing down. **FAQ** *What CWB means?* C is for color, W is for White and B is for Black. It's a guide to know which colors are used in every test and in which position. *Can I use other colors besides Black and White?* Yes! You can use any color you want, just swap the color on the slicer. *Wich use does this test have?* You can use it to test if your filament transparency is good enough to print one of our Retrovibes prints! *Can it be printed using another material?* We recommend using PLA tested with our "Color blending tester" included in this file. But you're free to try with other materials, have fun! *This is for multicolor printers?* Yes, it's meant to be used only on multicolor printers. *Only 3 colors, what's the trick?* We take advantage of the natural transparency of the colors to make them blend with each other using thin layers. With this technique, you can print with different values using only 3 colors! *Can I change the layer height?* We don't recommend changing the layer height, this model is specially designed to be printed in 0.2 layer height. We can't warranty good results with other heights. If I don't have a multicolor printer, i will be able to print it? Unfortunately no, this print is designed to be used only on printers with multicolor systems. If you know how to modify G-CODES and have an idea to solve this, please contact me at hello@merla3d.com. This model is a remix of the one that THESAMENAMETWICE made, he is the amazing artist responsible for the creation of this technique, check his unique works at [here](https://www.printables.com/@TheSameNameTwice).