About this 3D model

This model allows you to place the SwitchBot Bot over a raised button, but still allows you to press the button yourself. Here's a demo that maybe better illustrates what I mean (the yellow part is a double-sided tape): https://imgur.com/KRUCc1R I initially bought the SwitchBot Bot to press the raised button on my intercom to unlock the doors, but when it arrived, I realized that it's more suited for buttons that can be pushed in. And if I just placed it on a higher surface, it would kind of block the small button from being easily accessible manually. So I designed this, and I'm also including STEP files so you can modify it as you see fit. Few design notes: SwitchBot slides from the side, this allows removal of it to replace batteries or similar, without having to take the whole thing off. The pin is designed in a way that it can not fall on either side when in use. The tolerances are pretty generous, but increase them if your printer is not capable of meeting the requirements. Print notes: 0.2mm layer height PLA works just fine 3 walls Pin requires support in the upper parts since circles don't print well in air. I recommend tree supports. There's a BambuStudio project file included, take a look at that to see how I printed it.