About this 3D model

Description Here is yet another purge bucket for the Bambu Lab series printers. This one I designed to be printed in vase mode for super clean printing, no z-seam lines and uniform wall sheen/shine (using settings below). The 75mm depth requires one to sandwich the purge bucket between the printed and a wall to act as a backstop. The 150mm depth STL should be deep enough to use without a wall to act as a back stop and have extra volume for multi-color prints. It is also parametric if you need a deeper or narrower version using Fusion 360 and opening the parameters dialog and changing the Depth user variable. Print Settings (0.6mm nozzle recommended) 0.6mm Nozzle Spiral Vase Mode Enabled 0.25mm Layer Height Outer Wall Line Width = 1.499mm Inner Wall Line Width = 1.499mm 1 Wall Loop 0 Top Layers 6 Bottom Layers 50mm/s Outer Wall Speed 2500mm/s2 Outer Wall Acceleration Brim ONLY if required 0.4mm Nozzle 0.6mm nozzle recommended so it is more durable/stiffer but it can be printed but should be handled with care Spiral Vase Mode Enabled 0.20mm Layer Height Outer Wall Line Width = 0.999mm Inner Wall Line Width = 0.999mm 1 Wall Loop 0 Top Layers 5 Bottom Layers 50mm/s Outer Wall Speed 2500mm/s2 Outer Wall Acceleration Brim ONLY if required