About this 3D model

Coming from a Hydro Flask with the extra Sleeve/Boot i created my own quick and dirty sleeve for the 21oz bottle. It offers a little extra protection, nice contrast and dampen the sound of placing it on a hard surface. I also added a little venting hole for easier time putting and taking it off and to let moisture out. It got a tight but not too tight fit, it just works. Printed on a BambuLab P1P using these overall settings: Filament: Overture 95A TPU in Black Nozzle: 0.4mm Layer Height: 0.20mm Wall Loops: 2 Top Shell Layers: 4 Bottom Shell Layers: 3 Infill: 20 % Infill Pattern: Concentric/Gyroid Based on my test prints the gyroid tends to be a bit more firm compared to the concentric infill that still firm while standing, but has a little more give putting the bottle down. So: Gyroid firmer, concentric squishier. You are going to find two .3mf Project Files with either a concentric or gyroid infill pre-selected and some other fine-tuned settings. The overall .3mf Project files are based of @RolandDeschain Bambu Lab Overture Process Profiles which, for me, created pretty good results. Follow this for the Filament Process Profiles: https://www.printables.com/model/463757-overture-tpu-filament-and-process-profiles-bambu-l Like i said, it is nothing too fancy and just my first steps creating my own models. I hope you like it and stay hydrated!