About this 3D model
I used anti-backlash nut, but you can use normal nut.When you use a TR8X2 threaded rod you need to change "steps per mm " Z: to 400. No rafts, no support, layer height 0.2mm, infil 100% (because i used transparent filament).
I used anti-backlash nut, but you can use normal nut.When you use a TR8X2 threaded rod you need to change "steps per mm " Z: to 400. No rafts, no support, layer height 0.2mm, infil 100% (because i used transparent filament).