About this 3D model

I remixed three camera mounts to make them work with the Ender 3 S1 Pro. You need 6-7 M3 20mm screws, the two screws that are in the corner of the printer and the hing + screw from the c270. What you need to print: 1x camera mount print 1x camera mount 1st part 1x camera mount 2nd part 1-2x tripod arms (depends on how long you want it) 1x tripod top 1x c270 hinge First Source: https://www.thingiverse.com/thing:1228521 use tripod_arms.stl, tripod_top.stl and c270_hinge_M3_screw.stl from the original source I remixed a tripod arm which is the connection to the horizontal arm piece, it's the Camera_Mount_2nd_Part.stl Second Source: https://www.thingiverse.com/thing:3095730 Remixed the swivel arm to make it fit with M3 screws (the hole for the bolt is still for M5. It can be a bit tricky to make the screw fit tightly but it works) Used the extrusion base, remixed it together with the third source and made it fit with a M3 screw Third Source: https://www.thingiverse.com/thing:5560285 Used the bottom part that fits into the corner of the printer Made the holes for the screws a little bit larger because the stock screws wouldn't fit in my case added the extrusion base from the second source on top