About this 3D model

I created this table lamp with a height of 40cm ,consisting of 8-13 pieces, so it can be printed on 3D printers.Lamp can be fitted: 3-5 base legs ,1-3 rhum / hat / arrestThe body is drifting on the cable. One lamp hat fits 4x5mmLed. When installing rooted LED diodes, an example for calculating the resistorExample:Battery voltage is 12 V and we have the following data from the catalog: LED voltage = 2 V athe maximum possible current flowing through the diode is 20 mA. First Specify the resistors size.UR = Uz-UdSecondly, by ohm the law, we calculate the resistance of the resistor.For U, put the already calculated voltage on the resistor (10 V) and after we mount a current that can flow through the diode (20 mA = 0.02 A).Watch the current in mA! If we get 20, it's nonsense. If you enjoy with my designs, I invite you to become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation. https://tomshik3d.wixsite.com/tomshik3d