About this 3D model

? Greg from "Over the Garden Wal - 3D print model optimized for painting and customization. This file is print-ready: the model is pre-oriented, includes integrated supports, and requires no additional slicing prep. Delivered unpainted - total creative freedom for your color scheme! ? Technical Specifications: • File format: 1 × STL (model + integrated supports) • Base size: 50 mm height (without base) • ✅ Fully scalable in any slicer to fit your needs • Watertight geometry, no non-manifold edges • Supports are pre-added and optimized for easy removal • Compatible with FDM (0.4 mm nozzle) and SLA/DLP (0.05–0.1 mm layer) ⏱️ Print Parameters (at 50 mm scale): • Print time: 40 minutes 48 seconds • Filament consumption: 6.63 g • Recommended settings: - Layer height: 0.12–0.2 mm (FDM) / 0.05 mm (SLA) - Infill: 15–20% ? What's Included: • 1 х file (model with supports) ?️ Post-Processing Guide: 1. Carefully remove supports with cutters or flush cutters 2. Sand attachment points (400–800 grit) 3. Apply primer (spray or brush-on) 4. Paint with acrylics or enamel paints of your choice 5. Optional: seal with matte/gloss varnish for durability