About this 3D model

This is a filament painting of a female samurai. It was made by using Midjourney. Printed at 133x200 @ 3.04mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed White PrintBed Red PrintBed Orange ProtoPasta Partly Sunny Yellow PrintBed Chocolate PrintBed Grey Polymaker Muted Blue Swap Instructions: Black until layer #7 at 0.64mm Brown until layer #8 at 0.72mm Grey until layer #9 at 0.8mm Blue until layer #11 at 0.96mm Red until layer #18 at 1.52mm Pure Yellow until layer #23 at 1.92mm Orange until layer #28 at 2.32mm White for the rest.