About this 3D model

I took the adam west batman logo and put it into hueforge and made a print from it Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Sapphire Blue At layer #12 (1.04mm) swap to White At layer #21 (1.76mm) swap to Savannah Yellow for the rest.