About this 3D model

Summary Lidl Glider Pusher Power Pod Designed for 12 x 12 mm M2 hole mount. I used a Racerstar Racing Edition 1806 motor with a 4" prop. Designed to be printed with no supports. To make it stronger, print at a higher temperature. V2 is for motors shaft that stick out past the motor base. For the 12 x 16 mm mount https://makerworld.com/en/models/812793-lidl-glider-pusher-power-pod-12-x-16mm#profileId-915834 For the 16 x 19 mm 3mm mount https://makerworld.com/en/models/20214-lidl-glider-pusher-power-pod-16-x-19mm#profileId-748039 For the 16 x 16 mm 3mm mount https://makerworld.com/en/models/1464518-lidl-glider-pusher-power-pod-16-x-16mm-motor-mount#profileId-1527555 My set-up 3S 1000mah lipo 3 x 5 gram servos 3 bladed 4 inch prop Racerstar Racing Edition 1806 75 watts at full power 25a ESC All up, weight 320g Flight video https://youtu.be/dKA-KWGKGeA Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: ESUN PLA + orange Notes: Printed at 215 degrees