About this 3D model

Details- 3 Designs - Upgraded Stock Flat Flared See photo for more details on each. These are designed to be printed in TPU. (I use Sainsmart TPU 95A) You can use a non flexible filament, but I highly discourage it for comfort reasons. You will need M5 Threaded Heat Inserts @ 8mm in length to secure in the back end of the footpad. Use your soldering iron to slowly melt and set them in the holes. This kit is pretty nice - https://a.co/d/1ZZ9WmV You'll need grip tape for the upgraded stock version, I recommend the following. https://1wheelparts.com/products/ignite-grip-tape-onewheel-gt-1 As for the other variations, the pad footprint is bigger, so you'll have to cut your own grip to accommodate them. Print Settings- TPU filament Infill 10 -15% (i use line pattern) - increase % for stiffer pad Walls - 3 Top/Bottom Layers - 5 Support is required Boost Me If possible, please boost, like and rate this model to show your appreciation and support.