About this 3D model

With my model railway, I have lots of small items that I need to organise, but where I have my model railway, I have limited storage and limited spare wall space, most caninet organisers are a set size and are more generic for other uses. So I have designed this version for hobbyists or people who need a smaller type of storage cabinet. Multiple Cabinets can also be linked together vertically with a slide link pin. I have also got two other versions of this cabinet type for sale. I have designed this cabinet so it can be printed on most FDM printers and needs very few supports. The overall size of this storage is Width: 178mm, Height: 174mm and Depth with Draws: 72mmMounting holes are 150mm apart Horizontal and 120mm Vertical. The draws are:Single x24: 54mm wide, 17mm high, and about 67mm long; the internal space is 51mm x 56mm x 15mm. The internal space can be divided with an internal spacer that can also be printed. The example in the pictures was printed on a Bambu Labs A1 FDM Printer (0.4mm Nozzle, 0.2mm layer height).This design is best printed on an FDM printer (filament).The frame doesn't need any supports and the draws do need supports but very minimal (Front handle only). I used the following filament: ANYCUBIC PLA Matte 3D Printer Filament 1.75mm Purple https://amzn.to/4cfT6CC (Associate Link)ELEGOO PLA Filament 1.75mm Translucent https://amzn.to/46w4lDf (Associate Link)Most of the Example was printed in the Purple but I ran out of filament and had to finish the print with a Dark Blue Filament. I recommend 3DLAC Spray to help secure the print to the print bed whilst printing, and to help release the print after printing has finished.https://amzn.to/4cxPybm **(Amazon)** Please check my Website, **https://sites.google.com/view/pete3dprintinghelp/home** If you like my designs, then please would you support me through my Patreon account - https://www.patreon.com/PJD1974. Any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support, and for £4 you will get insight into my new designs and be able to contribute to my future projects. If you like my content and would like to buy me a coffee to say Thank You, then please click this link https://ko-fi.com/petes3ddesigns