About this 3D model

Fireworks at Night - Dual Lithophane Hueforge Print This print is a really, really cool dual lithophane piece. If you put a backlight behind it, or hold it up against a light, it will shine through the fireworks as if the print is coming to life. Video here: https://imgur.com/7386cnX Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used: PLA META Sunlu White Transmission Distance: 9.6 PLA Overture Cream Transmission Distance: 8.4 PLA META Sunlu Red Transmission Distance: 4 PLA+ Overture Dark Blue Transmission Distance: 1.8 PLA META Sunlu White Transmission Distance: 9.6 PLA Siddament Black Transmission Distance: 0.2 Swap Instructions: Start with White At layer #20 (0.96mm) swap to Cream At layer #31 (1.4mm) swap to Red At layer #42 (1.84mm) swap to Dark Blue At layer #48 (2.08mm) swap to White At layer #49 (2.12mm) swap to Black for the rest.