About this 3D model

This is derived from the logo / insignia of the Mars 2020 Perseverance rover mission. It's pretty easy to make, but I haven't found it, so I made it. Feel free to improve this model. All I ask is that you mention my name if you use my files. Print Settings Rafts: No Supports: No Resolution: .2mm Infill: 50% Filament: / PLA Red and white Notes: I recommend printing with 2 colors. You can easily achieve that using CURA's pause at height script and switching filaments . You can also try to pause the print at the right moment and swap filaments, but this may result in some frustrating results. You should use**thick walls and top/bottom** so the print is not too transparent and more rigid. You will find a version with the star left empty so you can easily make this a keychain . Feel free to scale it up or down. I printed mine at a 35mm diameter . You can also make it thicker by scaling the z axis only. I haven't tried printing the insignia with the star too. I suspect it may not print correctly due to the thin branches of the star. You can find a similar svg file to the one I used here . Category: Coins & Badges