About this 3D model

This is a three-part case: a bottom plate, the top plate that connects using a pin system, and a middle plate. Printing the case: Print the bottom and middle plates as-is. Flip the top plate on the slicer so that the top is resting on the build plate. Assembling the case: Insert the middle plate onto the bottom plate. Place the phone face up onto the bottom plate. Lay the top plate on the phone. Once pin holes on the top plate are aligned with the pins on the bottom plate, start to snap the top onto the bottom. Prusament PLA Azure Blue was used for the top and bottom plates; Prusament PETG Jet Black was used for the bottom layers of the middle plate, with FilamentOne PETG Red for the top layers.